Moffat MEH 631 Service Manual

ELECTRIC HOBMEH 631INSTRUCTION BOOKLETPlease read this instruction booklet before using the applianceKeep this instruction book for futurereference an

10Service and Spare PartsIf you require spare parts or an engineercontact your local Service Force Centre bytelephoning:08705 929 929Your call will

11

Grafiche MDM - Forlì 35676-3003 05/06www.electrolux.com

2Important Safety InformationYou MUST read hese warnings carefully before installing or using thehob. If you need assistance, contact our Customer Car

3z This hob should only be repaired orserviced by an authorised ServiceEngineer and only genuine approvedspare parts should be used. EnvironmentalInfo

4Hints and TipsSaucepans for use on solid plates shouldhave several characteristics:z They should be fairly heavy dutyz They should fit the heat area

5SYMPTOM The plate does not heat upSOLUTION Check that the unit is plugged in and theelectrical supply is switched on Check that the RCCB has not t

6Overall dimensions Cut out dimensionsWidth: 580 mm. Width: 550 mm.Depth: 500 mm. Depth: 470 mm.Engineers technical dataInstructionsfor the InstallerH

7Important safety requirementsThis hob must be installed in accordance withthe IEE Wiring Regulations (Current Edition).Detailed recommendations are c

8FO 0763FO 0764Dimensions aregiven in mm.Building InBuilding over a cupboard ordrawerIf the hob is to be installed above a cupboardor drawer it will b

9LNWiring DiagramThe hob should be connected to a doublepole switch with a minimum gap of 3 mm.between the switch contacts and of a typesuitable for t