Moffat MCP650BK User Manual download pdf (Page 11)

Installation Instructions

Important! The new appliance may only be in-

stalled and connected by a registered spe-

cialist.

Please observe this instruction, otherwise the

warranty will not cover any damage that may

occur.

1 Safety Instructions for

the Installer

• A device must be provided in the electrical installa-

tion which allows the appliance to be disconnected

from the mains at all poles with a contact opening

width of at least 3 mm

Suitable isolation devices include line protecting

cut-outs, fuses (screw type fuses are to be re-

moved from the holder), earth leakage trips and

contactors.

• In respect of fire protection, this appliance corre-

sponds to type Y (EN 60 335-2-6). Only this type of

appliance may be installed with a high cupboard or

wall on one side.

• Drawers may not be fitted underneath the hob.

• The installation must guarantee shock protection.

• The kitchen unit in which the appliance is fitted

must satisfy the stability requirements of

DIN 68930.

• For protection against moisture, all cut surfaces

are to be sealed with a suitable sealant.

• On tiled work surfaces, the joints in the area where

the hob sits must be completely filled with grout.

• On natural, artificial stone, or ceramic tops, the

snap action springs must be bonded in place with

a suitable artificial resin or mixed adhesive.

• Ensure that the seal is correctly seated against the

work surface without any gaps. Additional silicon

sealant must not be applied; this would make re-

moval more difficult when servicing.

• Avoid installing the appliance next to doors and

under windows. Otherwise hot cookware may be

knocked off the rings when doors and windows are

opened.

• The hob must be pressed out from below when re-

moved.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comments to this Manuals

No comments

Moffat MCP650BK User Manual Page 11

Comments to this Manuals

Related products and manuals for Hobs Moffat MCP650BK