Moffat MCP650BK User Manual download pdf (Page 12)

Electrical Connection

Before connecting, check that the nominal voltage of

the appliance, that is the voltage stated on the rating

plate, corresponds to the available supply voltage.

The rating plate is located on the lower casing of the

hob.

The heating element voltage is AC230V~. The appli-

ance also works perfectly on older networks with

AC220V~.

The hob is to be connected to the mains using a de-

vice that allows the appliance to be disconnected

from the mains at all poles with a contact opening

width of at least 3 mm, eg. automatic line protecting

cut-out,earth leakage tripsorfuse.

A type H05VV-F cable or one with a higher grade

must be used as the mains connecting cable.

The connection must be carried out as shown in the

diagram. The connecting links should be fitted ac-

cording to the appropriate connection diagram. The

earth lead is connected to terminal E. The earth lead

must be longer than leads carrying electric current.

The cable connections must be made in accord-

ance with regulations and the terminal screws

tightened securely.

Finally, the connecting cable is to be secured with

the mains cable cleat and the covering closed by

pressing firmly (lock into place).

Before switching on for the first time, any protective

foil or stickers must be removed from the ceramic

glass surface.

1 Once connected to the mains supply check

that all cooking zones are ready for use by

briefly switching each on in turn at the maxi-

mum setting.

Connection Diagram

For UK only: 230V...240V~

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Moffat MCP650BK User Manual Page 12